Z Stage Components Z Home Sensor Required Tools • 1 ⁄ 4 ” nut driver or standard screwdriver. Hardware • 6-32 x 3 ⁄ 8 ” slotted screw (x1) Removing the Z home sensor 1. Open the chamber door. 2. Lower the Z stage all of the way down. 3. Disconnect the Z home sensor cable by pressing in on the tab and pull- ing outward. See Figure 280. Figure 280: Z home sensor cable location Disconnect Z Home cable 4. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, remove the mounting screw. See Figure 281. -304