Z Stage The HP Designjet 3D printer has a Z stage pan that is 8 x 6 inches. The HP Designjet Color 3D printer has a Z stage pan that is 8 x 8 inches. The physical replacement is the same for both printers. When its time to calibrate they will have different procedures. Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver. • 5 ⁄ 16 ” socket driver or 5 ⁄ 16 ” box wrench. • 3 ⁄ 32 ” allen wrench. • 9 ⁄ 64 ” allen wrench. • Cutters • Z Guide rod stand off (x2) • Head bracket, dial indicator and belt tension gauge assembly • Y rod spacer (x2) • Leveling wrench -325