HP — Installing the Z stage

4. Using a 3 ⁄ 32 ” allen wrench, Reinstall the 4 Z motor energy chain mount- ing screws. 5. Move Z stage to the middle of travel. 6. Place one Z stage guide rod alignment fixture at the bottom of the Z stage. See Figure 310. 7. Place one Z stage guide rod alignment fixture at the top of the Z stage, See Figure 310. Figure 310: Z stage guide rod alignment fixture locations Z Stage guide rod alignment fixtures 8. Using a 5 ⁄ 16 ” socket driver or 5 ⁄ 16 ” box wrench, securely fasten the lower Z stage guide rod mounting screws. 9. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, securely fasten the upper Z stage guide rod mounting screws. 10.

Remove the upper and lower Z stage guide rod alignment fixtures. 11. Using a 3/32” allen wrench, reinstall the Z motor. Do not tighten the screws completely at this time. 12. Feed the Z stage leadscrew through the mounting brackets and through the Z motor. Align the leadscrew with the set screws. 13. Using a 9/64” allen wrench, tighten the Z stage leadscrew mounting bracket set screws. 14. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, loosen but do not remove the upper and lower Z stage leadscrew mounting brackets. See Figure 311. -328