Figure 311: Z stage leadscrew mounting bracket locations Z Stage leadscrew mounting brackets 15. Raise the Z stage up all the way and insert the Z stage leadscrew align- ment fixture at the bottom of the guide rods. See Figure 312. 16. Once the alignment fixture is in properly, turn the locking screws 1/4 turn counter clockwise to lock in place. See Figure 312. Figure 312: Inserting the Z stage guide rod alignment fixture 17. Using a 5 ⁄ 16 ” socket driver or 5 ⁄ 16 ” box wrench, securely fasten the lower Z stage leadscrew mounting bracket screws from the backside of the printer. 18.
Remove the Z stage leadscrew alignment fixture by pressing in the screws and turning 1 ⁄ 4 turn clockwise to unlock. -329