29. Mark a location on each corner of the platen surface with a marker See figure 314 and figure 315 . These marks will be used to reference the same locations when leveling the table. Figure 314: HP Designjet 3D (8in x 6in) Z stage table location points BL (Back Left) BR (Back Right) FR (Front Right) FL (Front Left) Figure 315: HP Designjet Color 3D (8in x 8in) Z stage table location points BL (Back Left) BR (Back Right) FR (Front Right) FL (Front Left) 30. Attach a dial indicator to the head bracket. 31. Attached the head bracket to the toggle head assembly. 32. Move the dial indicator to the back left (BL) corner over the marked loca- tion. -331