Руководство по эксплуатации Kuhnke H62 Linear Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk H62 Series Linear Solenoid Push and/or Pull Type 2) Series H 6286-R-... solenoids are available with return spring F (0 mm) = 2.5 N and F (15 mm) = 0.75 N 3) Other DC voltages are available on request . Weight: Complete solenoid: appr. 320 g Armature: appr. 45 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: B (max. permissible temperature = 130 ° C) H6206-F 24 V DC 100% ED Long life expectancy through plastic bobbin armature bearing. * On request, the solenoid can also be supplied with service-free DU armature bearing for maximum durability.

4) If solenoid is mounted directly onto a flat metal surface of at least 160 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating Document LNSH62/12 Revision 00 3 100 %ED 80 60 50 20 30 Force vs. Stroke diagram F = f (s) 10 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature F/N 3 4 5 8 5 15 stroke s = 0 corresponds to armature in fully home position 0,8 1 2 50 30 Force vs.

stroke characteristics measured without return spring 0 5 10 15 20 100 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

H D* 62 06 – F – 24 V DC 100 % ED Ord er specifications H Line ar solenoid D* DU armature 62 Size s Desi gn type 06 Pull type solenoid 46 Thrust type solenoid 86-R Combi type solenoid with return spring2) Coil terminals F Flying leads (10 cm standard length) A Push-on connector (optional) 24 No minal voltage (standard voltage)3) 100 % ED Per m. duty cycle under air cooled conditions (LK) 100 50 30 15 5 % Perm. duty cycle (ED)4) 11 20 33 50 130 W Nominal coil power Pn 45 16 ms Actuation time (ED)

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk H62 Series Linear Solenoid Push and/or Pull Type 63 ± 0,5 M3 Dimensions given with armature in fully home position Direction of stroke 12 25 4 Ш4 M3 50 30,5 ± 0,5 82,5 34 44 Dimensions given with armature in fully home position Direction of stroke 12 25 M4 27 M3 93,5 Document LNSH62/22 Revision 00 3 Dimensions given with armature in fully home position Direction of stroke 12 25 4 Ш4 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. H6206 pull type solenoid 1 50 0 Ø13 5,5 27 38 34 44 27 38 M3 M3 27 H6246 thrust type solenoid 27 38 27 38 M3 10+1 Ø13 H6286-R combi type solenoid with return spring 1 ,5 50 30,5 0,5 0 5 i 27 38 34 44 27 38 M3 7 M3 Dir 10+1 M4 2

Стр. 2