Руководство по эксплуатации линейных соленоидов Kuhnke V45 (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk V45 Series Linear Solenoid Push & Pull Type Order specifications Linear solenoid Design type Coil terminals Plug 1) Flying leads (10 cm standard length) Nominal voltage (standard voltage) 2) Perm. duty cycle under air cooled conditions (LK) 1) Suits plug-in socket 6.3 DIN 46247 2) Other voltages are available on request up to 230 V DC Weight: Complete solenoid: appr. 970 g Armature: appr. 220 g Standard: Voltage: 24 V DC Flying leads: 10 cm Insulation class: E (max. permissible temperature = 120 ° C) V45-N 24V DC 100% ED Accessories: Plug-in socket part no. Z801 and Z811 Metal case Terminal box:

6.3 DIN 46247 3) If solenoid is mounted directly onto a flat metal surface of at least 300 cm 2 , the duty cycle can be extended up to 1.3 x nominal rating 200 %ED Document LNSV45/12 Revision 00 2 100 40 50 80 5 F/N 15 Force vs. Stroke diagram F = f (s) 20 40 25 10 65 Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature 5 100 2 3 stroke s = 0 corresponds to armature in fully home position 0 5 10 15 s/mm Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. V 45 – N – 24 V DC 100 % ED V 45 F N 24 100 % ED 100 65 40 2 5 15 5 % Perm. duty cycle (ED)3) 18 29 43 6 7 107 275 W Nominal coil power Pn

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk V45 Series Linear Solenoid Push & Pull Type ca.67 35 12 Dimensions given with armature in fully home position Direction of stroke 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm Document LNSV45/22 Revision 00 2 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.

The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. 12,5 50 ca.55 5 25+1 M6 Ø20 19 Ø6H8 M5 45 30 ca.18 6 22,5 6 18 75 40 140 ca.55 6 6 18 75 40 140 6 22,5 6 Ø20 9,0 Ø 1 5,5

Стр. 2