EPSON — When Nozzle Overlap is set to Standard

L-6534VW Operation Guide Troubleshooting With the substrate and the preset to be used in production printing, use the Set All Colors function to adjust the density. If the streak is still noticeable after the adjustment, identify the color of the streak by using the pattern for determining the color to be adjusted, and adjust the density. A Select the preset for printing and perform test printing. B Select the Preset Management menu - For Printing tab, and select the Preset for Printing that was used for printing. Then, press Edit . See the following for details on how to edit presets.

U “Creating and Editing Preset for Printing” on page 91 C Select (Subs) Head Stitch Density Adjustment or (Wh) Head Stitch Density Adjustment , and press Edit . See the following for details on selecting an adjustment method. 388 Conditions of Streaks How to Adjust If you find any streaks on printout on the substrate Adjust using (Subs) Head Stitch Density Adjustment. If you find any streaks on printout of surface white + color printing with this press Adjust using (Wh) Head Stitch Density Adjustment. You can only adjust color inks. This item might be disabled for some print application software.

If you find any streaks on printout on the substrate where white ink is partly printed when printing onto the substrate and white ink Adjust using both items above.