EPSON — When Nozzle Overlap is set to Standard

L-6534VW Operation Guide Troubleshooting D Select Set All Colors and use the slider to adjust the density. If the streaks are dark, move the slider in the - direction. If streaks are light, move the slider in the + direction. Note: ❏ If you want to check the results for multiple adjustment values at once, you can create presets for each value and group them for printing. U “Grouping Multiple Print Jobs and Printing Continuously (Group Printing)” on page 198 ❏ When you specify the color for adjustment, you need to print the pattern for determining the color to be adjusted to identify the color of the streak.

We recommend that you also print the pattern for determining the color to be adjusted when you use group printing. ❏ The Dv adjustment value is not reflected on the print surface where the amount of Dv ink applied is less than the matte tone. E Check that the switch for the press is in the Standby position, select the job from the Job Management menu - Printed tab, and then press Reprint . F Press Apply Preset on the Waiting tab, and then reprint. G Check the print results. If streaks are noticeable in a specific color, identify the color of the streak by using the pattern for determining the color to be adjusted. Proceed to the next step. If there are Wh or Dv streaks, proceed to step 10.

389