L-6534VW Operation Guide Troubleshooting H Print the pattern for determining the color to be adjusted (a PDF file) with the preset for printing to be used in production printing, and then cut out the pattern. Dv-ink models Or-ink models I Align the print results in step 7 with the cut pattern for determining the color to be adjusted at their upper and lower ends. Then identify the color of the streak. The color in the pattern for determining the color to be adjusted matching the color at the streak position will be adjusted. For example, in the diagram below, Magenta is the color to be adjusted.
If you are using an Or-ink model and cannot determine whether the color of the streak is magenta or yellow, try adjusting both colors. J Select the Preset for Printing that was used for adjusting in Set All Colors . Then, press Edit . K Select (Subs) Head Stitch Density Adjustment or (Wh) Head Stitch Density Adjustment , and press Edit . 390