L-6534VW Operation Guide Troubleshooting L Select Set Each Color and use the slider to adjust the density of the color of streaks. If the streaks are dark, move the slider in the - direction. If streaks are light, move the slider in the + direction. M Check that the switch for the press is in the Standby position, select the job from the Job Management menu - Printed tab, and then press Reprint . N Press Apply Preset on the Waiting tab, and then reprint. O Check the print results. P Repeat the density adjustments and test printing until the streaks are no longer noticeable. This completes this section.
If the appearance of the streaks does not improve after adjusting, try setting Nozzle Overlap to Customized and then adjusting. U “When Nozzle Overlap is set to Customized ” on page 392 391