L-6534VW Operation Guide Troubleshooting F In Nozzle Overlap , move the slider that is the same color as the streaks to adjust them. Move the slider toward [-] if the streaks are dark (a). Move the slider toward [+] if the streaks are white (b). Note: To adjust the Dv, click Adjust Dv to display the adjustment screen, and then adjust by moving the slider in 5 incremental steps from -2 to 2. The adjustment value for Dv is linked to (Subs) Head Stitch Density Adjustment when Nozzle Overlap is set to Standard. G Repeat adjustments and test printing until the streaks become less noticeable. When the streaks are no longer visible, the procedure is complete.
If streaks still remain, proceed to the next step to adjust the Density . Note: If streaks still remain, adjust the color of the streaks so that they look darker. You may not be able to remove white streaks even if you proceed to the next step and adjust the Density. H Select (Subs) Head Stitch Adjustment or (Wh) Head Stitch Adjustment , and then press Edit . I In Density , move the slider that is the same color as the streaks to adjust them. Move the slider toward [-] if the streaks are dark. Move the slider toward [+] if the streaks are light. 393