L-6534VW Operation Guide FAQ The last eye mark specified for additional printing E Close the top front cover on the press. When aligning the eye marks on the rear surface, close the bottom front cover and the top front cover in that order. F Press Yes on the touch panel. How can I extend the interval of the head cleaning to print for a long time? A. Set Pinning UV Light Strength to Off. The interval of the Auto Head Maintenance will be longer than the interval when Standard is selected. Note that the image quality may decrease. Can I stop the press from entering head maintenance mode during printing? A. Yes.
We recommend calculating the job printing time and performing manual cleaning before you start printing. A Calculate the job printing time. B Perform test printing. 405 Print Speed Calculation formula 50 m/min (Productivity) Design length [m] × Number of copies / 50 30 m/min (Standard) Design length [m] × Number of copies / 30 15 m/min (High density) Design length [m] × Number of copies / 15 7.6 m/min (Reverse White) Design length [m] × Number of copies / 7.6