L-6534VW Operation Guide FAQ C Before starting to print, check the time until the next auto head maintenance displayed on the Operation Status screen. D If the time until the next auto head maintenance is longer than the time needed for the print job, you can continue printing as it is. Note: Since auto head maintenance is performed for each type of ink, the time until the next auto head maintenance differs depending on the type of ink. E If the time until the next auto head maintenance is shorter than the time needed for the print job, perform manual cleaning for Manual Head Maintenance, and then print. Note: Select all colors to perform manual cleaning for all colors at the same time.
If you are not cleaning all colors at the same time, select the ink you want to perform maintenance for, and then execute. Is there any way to suppress the ink odor? A. If the ink is not curing correctly, an odor may remain. If you are still concerned by the odor after a day, laminate the printed material. 406 Status Cause and Solution When printing on substrate that absorbs ink, such as uncoated paper and Yupo® Ink that gets absorbed into the substrate is difficult to cure. Use the additional UV lamp curing unit (except for Yupo®). When printing images using a small amount of ink Since a small amount of ink can be subject to oxygen inhibition, it is difficult to cure. Leave it for one day.