L-6534VW Operation Guide FAQ A Open the print data to be displayed in Adobe Illustrator. Then register the spot color to be output for a white plate in Swatch. B Select the object in the area where blurring or bleeding is noticeable. Then in the Line panel, set the line position. C In the Color panel, set the line color and the amount of transparency. Glossy effect cannot be obtained even after using Dv ink A. Change Print Speed in Preset for Printing to 15 m/min (High density) or 7.6 m/min (Reverse White). When Print Speed is set to 30 m/min or 50 m/min, Glossy is not supported.
Change Print Speed in Preset for Printing to 15 m/min (High density) or 7.6 m/min (Reverse White) , and check the print results. 418 Item Setting Content Swatch name White Color type Spot color Item Setting Content Align Stroke Align the center or the line with the outer side Item Setting Content Color The Swatch set in step 1 Opacity Try setting this to 10 % or more