HP — Numerical printer messages

Table 7-3 Numerical printer messages (continued) 230 Printer error troubleshooting C9660-90901 Message Description Action 53.XY.ZZ PRINTER ERROR To continue press CANCEL JOB An error occurred on some memory of the printer. X DIMM Type 1 RAM Y Device Location 1 DIMM Slot 1 2 DIMM Slot 2 3 DIMM Slot 3 4 DIMM Slot 4 ZZ Error Number 0 unsupported memory 1 unrecognized memory 2 unsupported memory size 3 failed RAM test 4 exceeded maximum RAM size 5 invalid DIMM speed Press CANCEL JOB. If the problem persists, replace the DIMM card in the slot indicated. 53.10.05 PRINTER ERROR To continue turn off then on A DIMM is installed in both 168-pin DIMM Slot 4 and 100-pin DIMM Slot 5.

This is an invalid configuration. DIMMs can not be installed in both of these slots at the same time. Remove one of the DIMMs, or move one of the DIMMs to a different slot. 54.X PRINTER ERROR X Description 1 temperature 3 image density sensor 5 color plane registration sensor 6 image density sensor 7 yellow drum home position sensor 8 magenta drum home pos. sensor 9 cyan drum home position sensor 10 black drum home position sensor 11 black density sensor 12 cyan density sensor 13 magenta density sensor 14 yellow density sensor 19 ETB speed control sensor 20 color plane registration sensor 21-24 toner level sensors Turn the printer off and then back on, then check items in the order listed.

54.1 error Check the fuser. See 50.X fuser error. 54.3 error Check the connections. Replace the color registration detection assembly. 54.5 error Check the connections. Replace the color registration detection assembly. 54.6 error Check the connections. Replace the color registration detection assembly. 54.7, 54.8, 54.9, or 54.10 error Check the connections. Replace the drum phase sensor for the indicated color. 54.11, 54.12, 54.13, or 54.14 error Check the connections. Check the cartridge and replace it if necessary. Replace the color registration detection assembly. 54.19 error Check the ETB connection. Replace the ETB. Replace the DC controller. 54.20 error Check the connection.

Replace the color registration detection assembly. 54.21, 54.22, 54.23, or 54.24 error Check the connections. Replace the toner level sensing PCB. Replace the DC controller.