HP — Replacing the transfer unit

6 Remove the new transfer unit from the bag. Place the used transfer unit in the bag for recycling. See the enclosed recycling guide for recycling instructions. 7 Hold the transfer unit on either side. Guide the feet into the cups and slide the transfer unit into the printer. 8 Close the transfer unit and front cover. Close the top cover and turn the printer on. After a short while, the control panel should display NEW TRANSFER KIT= . 9 Press to highlight YES . 10 Press to reset the transfer unit count. 11 Wait for the printer to calibrate. 80 Replacing supply items C9660-90901