Downloaded from https://www.everyspec.com MIL-STD-1311D FIGURE 4471-5. Equipment layout for recovery time measurements (Dual TR or Pre-TR) method D. 2.4.2 Procedure. The procedure for testing is the same as those given in either method A or method B for TR tubes. Either the pulsed signal method or the CW signal method may be used. 2.4.3 Precautions. The 3 dB couplers shall have a VSWR less than 1.10, shall split the power evenly to within 0.25 dB, and shall have a minimum isolation of 25 dB. 2.5 Method E (ATR tubes). 2.5.1 Equipment. The circuit shown on figure 4471-6 is used in measuring recovery time of ATR tubes. METHOD 4471B 4471-4 25 March 1970