Department of Defense MIL-STD-1311D — MIL-STD-1311D Test Methods for Electron Tubes — DoD Standard Manual PDF

Downloaded from https://www.everyspec.com MIL-STD-1311D FIGURE 4471-6. Equipment layout for ATR tube recovery time measurements. 2.5.2 Procedure. The ATR tube shall be mounted as specified on the TSS. The probing signal frequency shall be within 0.1 percent of the resonant frequency of the ATR under test. The distance between the position of the minimum in the unfired condition and the position of the minimum at the specified time interval for the transmitter pulse, shall be less than 0.042 guide wavelengths. METHOD 4471B 4471-5 25 March 1970