Downloaded from https://www.everyspec.com MIL-STD-1311D BULB, SCREEN, AND FACEPLATE QUALITY METHOD 5106 (Cathode-ray tubes) 1. The tube shall be viewed while operating at the normal test voltage conditions specified on the TSS with the screen fluorescing uniformly under a defocused scan. Long persistence screens shall be viewed under phosphorescence. In either case, the ambient illumination shall be well below the luminescent level. 1.1 Screen and faceplate blemishes. Inspection shall be made for spots, holes, and blemishes on the screen and faceplate of the tube.
The number and size of, and the intensity variations due to, spots, holes, and blemishes shall not exceed those specified in Appendix D of MIL-PRF-1. 2. Bulb defects (see Appendix D of MIL-PRF-1). METHOD 5106 5106-1 19 April 1968