Department of Defense MIL-STD-1311D — MIL-STD-1311D Test Methods for Electron Tubes — DoD Standard Manual PDF

Downloaded from https://www.everyspec.com MIL-STD-1311D METHOD 5437 ALIGNMENT (Vidicons) 1. The tube shall be tested in a camera system with associated monitors as shown on the block diagram of figure 5426-1. 2. The spurious signal test pattern on figure 5433-1 shall be used when performing this test. 3. The alignment coil currents of each horizontal and vertical coil shall be adjusted until the center of the test pattern remains stationary as Ec3 is varied in and out of focus. The alignment coil currents shall be within the limit(s) specified. METHOD 5437 5437-1 28 March 1975