omron — 2-1-2 Installation onto the Operation Panel

2 Installing the NB Unit and Connecting Peripheral Devices  The insert positions on the body of NB3Q-TW  B/NB10W-TW01B (same fixing method as above) NB3Q -TW  B NB10W -TW  B Precautions for Safe Use • Do not let metal particles enter the Units when preparing the panel. • The mounting panel must be between 1.6 and 4.8 mm thick. Tighten the Mounting Brackets evenly to a torque of between 0.5 and 0.6 N·m to maintain water and dust resistance. If the tightening torque exceeds the specified value, or the tightening is not even, deformation of the front panel may occur. What is more, make sure the panel is not dirty or warped and that it is strong enough to hold the Units.

 Display Mode of NB Series touch panel NB Series touch panel has 2 display modes: horizontal and vertical. The display mode can be selected when dragging a PT from Project Library Window into Configuration and Setup Window. Menu Task Bar Menu Task Bar Horizontal display Vertical display 2-4 NB-series Programmable Terminals Setup Manual(V107)