Super Micro Computer, Inc. PDSG4/PDSGE — Super Micro PDSG4/PDSGE User & Service Manual PDF

Chapter 4: BIOS 4-4.5 Hardware Monitors This section allows the BIOS to display the status of hardware components monitored by the AwardBIOS. (*See the note below.) Warning : Be Sure to read CPU, DDR memory, MCH chipset docments before select CPU, Memory and MCH core voltage settings. Incorrect settings may cause damage to the components and result in system failure. In addition, a very high DRAM or CPU frequency may cause the system to become unstable. When this occurs, reset the setting to the default setting. CPU Warning Temperature These features allows you to set the CPU warning temperature.

If the CPU temperature reaches this pre-set threshold, an alarm will be activated, and a warning message will be displayed on the screen. To prevent CPU Overheat, the system fan will run at the full speed when the CPU temperature reaches 10 0 C below the threshold. The options for the CPU warning temperature are Disabled, 70 0 C/158 0 F, 75 0 C/167 0, F, 80 0 C/176 0 F , 85 0 C/185 0 F, 90 0 C/194 0 F, 95 0 C/203 0 F and 100 0 C/212 0 F. Chipset Warning Temperature These features allows you to set the Chipset warning temperature. If the chipset temperature reaches the pre-set threshold, an alarm will be activated, and a warning message will be displayed on the screen.

The options for the chipset warning temperature are Disabled, 50 0 C/122 0 F, 55 0 C/131 0 F, 60 0 C/140 0 F, 65 0 C/149 0 F, 70 0 C/158 0 F, 75 0 C/167 0, F and 80 0 C/176 0 F. The following temperatures will also be monitored: Temperature Monitoring : Current System Temperature , Current CPU Temperature, Current Chipset Temperature. The following fan speed item will be displayed: CPU Fan 1 Speed/Fan 2 Speed/Fan 3 Speed//Fan 4 Speed/Fan 5 Speed The following Voltage items will be monitored: V_CORE (CPU)/V_CORE (Chipset)/+1.8V/+12V/-12V/+5V/+3.3V (Main)/+3.3V (Standby)/+3.3V (Analog)/+3.3V (Battery) *Note:

In the Windows OS environment, the Supero Doctor III settings take pre- cedence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the temperature threshold settings previously set in the BIOS. Any subsequent changes to these thresholds must be made within Supero Doctor, since the SD III settings override the BIOS settings. For the Windows OS to adopt the BIOS temperature threshold settings, please change the SDIII settings to be the same as those set in the BIOS. 4-9