PDSG4/PDSGE User's Manual 4-4.6 Processor & Clock Options Thermal Management the thermal management of the system. The options are Thermal Monitor 1 (On This setting allows the user to select the method to be used by the BIOS to control die throttling) and Thermal Monitor 2 (Ratio & VID transition.). Limit CPUID MaxVal Select Enable to allow the user set the limit on CPUID Maximum Value. The options are Enabled and Disabled. Hyper-Threading Set this option to Enabled to activate the hyper-threading function of the CPU. Enabling the hyper-threading function makes each CPU appear as two to any programs that support it (you must have OS support also). The settings are Disabled and Enabled .
(Set to Enabled for the Windows XP and Linux 2.4x operating systems. Disable this feature for operating systems that do not support Hyper-Threading.) Auto Detect PCI CLK Select Enabled to allow the system automatically detect the PCI clock. The options are Enabled and Disabled. Spread Spectrum Spread Spectrum is a technique used to stabilize a system by reducing the level of ElectroMagnetic Interference. The options are Enabled and Disabled . CPU Overclocking Select Enable to increase CPU frequency and system performance . The options are Enabled and Disabled . Warning: Take Caution when using Overclocking. Improper Overclocking may result in system instability or system failure.
No Execute Mode Memory Protect Set to Enabled to enable Execute Disable Bit and allow the processor to classify areas in memory where an application code can execute and where it cannot, and thus preventing a worm or a virus from inserting and creating a fl ood of codes to overwhelm the processor or damage the system during an attack. (*Note: this feature is available when your OS and your CPU support the function information regarding hardware/software support for this function, please refer to of Execute Disable Bit.) The options are Disabled and Enabled . (Note: For more Intel's and Microsoft's web sites.) 4-10