Super Micro Computer, Inc. PDSG4/PDSGE — Super Micro PDSG4/PDSGE User & Service Manual PDF

Appendix B: Award BIOS POST Codes Appendix B Award BIOS POST Codes This section lists the POST (Power On Self Testing) Codes for the Award BIOS. B-1 POST (hex) Description CFh Test CMOS R/W functionality. C0h Early chipset initialization: - Disable shadow RAM - Disable L2 cache (socket 7 or below) - Program basic chipset registers C1h Detect memory - Auto detection of DRAM size, type and ECC. - Auto detection of L2 cache (socket 7 or below) C3h Expand compressed BIOS code to DRAM. C5h Call chipset hook to copy BIOS back to E000 & F000 shadow RAM. 0h1 Expand the Xgroup codes located in physical address 1000:0 02h Reserved 03h Initial Superio Early Init switch _ _ 04h Reserved 05h 1.

Blank out screen. 2. Clear CMOS error fl ag. 06h Reserved 07h 1. Clear 8042 interface. 2. Initialize 8042 self-test. 08h 1. Test special keyboard controller for Winbond 977 series Super I/O chips. 2. Enable keyboard interface. 09h Reserved 0Ah 1. Disable PS/2 mouse interface (optional). 2. Auto detect ports for keyboard and mouse followed by a port and interface swap (optional). 3. Reset keyboard for Winbond 977 series Super I/O chips. 0Bh Reserved 0Ch Reserved 0Dh Reserved 0Eh Test F000h segement shadow to see whether it is R/W-able or not. If test fails, keep beeping the speaker.

0Fh Reserved 10h Auto detect fl ash type to load appropriate fl ash R/W codes into the run time area in F000 for ESCD & DMI support.