Super Micro Computer, Inc. PDSG4/PDSGE — Super Micro PDSG4/PDSGE User & Service Manual PDF

PDSG4/PDSGE User's Manual B-2 POST (hex) Description 11h Reserved 12h Use walking 1's algorithm to check out interface in CMOS circuitry. Also set real-time clock power status, and then check for override. 13h Reserved 14h Program cipset defaults into chipset. Chipset default values are MODBINable by OEM customers. 15h Reserved 16h Initial Early Init Onboard Generator switch. _ _ _ 17h Reserved 18h Detect CPU information including brand, SMI type (Cyrix or Intel) and CPU level (586 or 686). 19h Reserved 1Ah Reserved 1Bh Initial interrupts vector table, If no special specifi ed, all H/W interrupts are directed to SPURIOUS INT HDLR & S/W interrupts to SPURIOUS soft HDLR.

_ _ _ _ 1Ch Reserved 1Dh Initial EARLY PM INIT switch. _ _ 1Eh Reserved 1Fh Load keyboard matrix (notebook platform). 20h Reserved 21h HPM initialization (notebook platform) 22h Reserved 23h 1. Check validity of RTC value, e.g. a value of 5Ah is an invalid value for RTC minute 2. Load CMOS settings into BIOS stack. If CMOS checksum fails, use default value instead. 3. Prepare BIOS resource map for PCI and PnP use. If ESCD is valid, take into consideration of the ESCD's legacy information. 4. Onboard clock generator initialization. Disable respective clock resource to empty PCI and DIMM slots. 5. Early PCI initialization: - Enumerate PCI bus number. - Assign memory and I/O resource.

- Search for a valid VGA device and VGA BIOS and put it into C000:0. 24h Reserved 25h Reserved 26h Reserved 27h Initialize INT 09 buffer. 28h Reserved 29h 1. Program CPU internal MTRR (P6 & PII) for 0-64K memory address. 2. Initialize the APIC for Pentium clas CPU. 3. Program early chipset according to CMOS setup. Example: onboard IDE con- troller. 4. Measure CPU speed. 5. Invoke video BIOS.