Super Micro Computer, Inc. PDSMA+ / PDSMA-E+ — Super Micro PDSMA+ / PDSMA-E+ User Manual: Motherboard Guide PDF

PDSMA+/PDSMA-E+ User's Manual JWD controls Watch Dog, a system monitor that takes action when a soft- ware application hangs. Close Pins 1-2 to reset the system if a program hangs. Close Pins 2-3 to generate a non-maskable interrupt for the program that hangs. (This function requires soft- ware support.). Watch Dog must also be enabled in BIOS. Watch Dog Enable Power Force On Enable/ Disable Jumper JPF allows you to enable or disable the Power Force On function. If enabled, the power will always stay on automatically. If this function is disabled (the normal setting), the user needs to press the power button to power on the system. USB 1/2 KB/MS COM1 VGA A. Watch Dog Enable B.

Power Force On JLAN1 JLAN2 S A+/PDSMA-E+ M S D P R E P U ® COM2 Floppy J9 WOL JL1 SATA1 SATA3 2-24 Watch Dog Jumper Settings (JWD) Jumper Setting Definition Pins 1-2 Reset Pins 2-3 NMI Open Disabled Power Force On Enable/Disable Jumper Settings (JPF) Jumper Setting Definition Open Normal Closed Force On 8-pin PWR VGA DIMM 2B PW 4PW 3 JPR1 PWR ATX 24-Pin CTRL DIMM 1B Fan1 DIMM 2A JPG1 (CPUFan) DIMM 1A Fan6 Intel 3000 CPU IntelO 3R 010 Fan2 LGA 775 North Bridge CTRL A JLED Fan3 Fan5 FP PCI-Exp.

x8 JWD LAN1 PCI-X 64-bit 133 MHz JPF 2.0 CTRL JJII22CC21 B IPMI PCI 32-bit 33 MHz PXH-V LAN2 PCI 32-bit 33 MHz CTRL JJPPLL12 PCI 32-bit 33 MHz BIOS LL EE 34 ICH7R I/O PCI 32-bit 33 MHz *CompacJ t W Fl F a1 sh only Primary IDE Printer South Bridge Battery PCI 32-bit 33 MHz JBT1 SPKRUSB5/6USB3/4JP3 SATA0SATA2 LE1 n4 3 4PW PW JPR1 8-pin PWR 2 R PW ATX 4-Pin DIMM 2B DIMM 1B Fan1 DIMM 1A BIOS 1 *Compact Flash only n4 Primary IDE