Sound and Volume Controls English Sound Control Selecting digital sound effects Select a preset digital sound effects that matches your disc’s content or that optimises the sound of the musical style you are playing. IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected (see page 9). G Press SOUND on the remote. G Press SURR to select : MULTI-channel or STEREO. The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. The centre and surround speakers operate only when the DVD home cinema system is set to Multi-channel mode. In DVD, The available output modes for Multi- channel include:
Dolby Digital, DTS (Digital Theatre Systems) Surround, Dolby Surround and Dolby Pro Logic II. In music discs, AUX, TUNER, TV, Select Multi-channel (Dolby Pro Logic II) or Stereo. Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, mono (single channel sound) sources will not produce any sound from the surround speakers. Selecting surround sound When playing movie discs or in TV mode, you can select : CONCERT, DRAMA, ACTION or SCI-FI. When playing music discs or while in TUNER or AUX mode, you can select : ROCK, DIGITAL, CLASSIC or JAZZ.
Volume control G Adjust VOLUME control (or press VOL +/- on the remote) to increase or decrease the volume level. " VOL MIN " is the minimum volume level and “ VOL MAX ” is the maximum volume level. To turn off the volume temporarily G Press MUTE on the remote. Playback will continue without sound and " MUTE " appears. To restore the volume, press MUTE again or increase the volume level. Helpful Hint: You are not able to select the surround sound mode if the system menu/menu bar is turned on. 36 001-041-LX36-22-Eng 21/08/2003, 9:44 AM 36 3139 115 22612