Other Functions Setting the Sleep timer Recording to an external device English The sleep timer enables the system to switch to Eco Power standby mode automatically at a preset time. 1 Connect the external recording device to LINE OUT . (See pages 13 “Connections-optional“). G Press SLEEP on the remote repeatedly until it reaches the desired preset turn-off time. The selections are as follows (time in minutes): 15 30 45 60 OFF 15 SLEEP will show on the display panel, except if " OFF " is selected. Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed. " SLEEP10 " " SLEEP9 "....
" SLEEP1 " " SLEEP " 2 Select the source to record from your DVD system (DISC, TUNER, TV or AUX). 3 For ultimate recording, press SOUND to select ‘CLASSIC’ or ‘CONCERT’ and press SURR to select ‘STEREO’. 4 Start recording on the external recording device. Helpful Hint: Refer to the owner’s manual of the connected equipment for details. To cancel the sleep timer G Press SLEEP repeatedly until " OFF " appears or press the STANDBY ON ( B ) button. Using the remote to operate your ‘Philips’ television Switching on/off 4 Switching to active mode 1 G Press the SOURCE control to select : DISC FM MW TV AUX DISC .... OR 2 Press DISC, TV, TUNER or AUX on the remote.
3 Switching to Eco Power standby mode 1 Press and hold TV to turn on your TV. 2 Press Ў1 / or use the numeric keypad (0-9) to select the TV’s channel. G Press STANDBY ON ( B ). The display screen will go blank. 3 Press TV VOL + / - to adjust the TV’s volume level. 4 Press and hold B to turn off your TV. Helpful Hint: When listening to TV or AUX programs , press TV or AUX on the remote to set the DVD system to TV or AUX mode in order for the sound to be heard. 37 001-041-LX36-22-Eng 21/08/2003, 9:44 AM 37 3139 115 22612