2 Hardware Specifications and Wiring „ DVP-10PM #1: Y0 ~ Y7 on DVP20PM00D are relay output; FP2+, FP2- on DVP20PM00M are high-speed transistor output, Y2 and Y3 are low-speed transistor output, Y4 ~ Y7 are relay output. Common point for Y0: C0; common point for Y1: C1; common point for Y2 and Y3: C2; common point for Y4~Y7: C3. Output points of DVP10PM are all high-speed transistor outputs, and Y0~Y3 can be used as general output points. #2: The life cycle curve:
3000 2000 1000 =0.4) Operation(X10 ) 3 500 200 300 100 30 50 20 Current(A) 0.5 0.1 0.2 0.3 0.7 1 2 DVP-PM Application Manual 2-5 Item Single-ended common point tr ansistor Single-ended common point#1 relay output peed output#1 Spec Low speed High s delay time ONOFF 30us Over-current protection N/A Item Single-ended common point tput relay output Double-ended differential ou Spec Maximum frequency 1 MHz 200 kHZ Output indicator LED display; light on = ON, light off = OFF Output point configuration Y10 ~ Y17 Y0 ~ Y3 Working voltage 5 VDC 5 ~ 30VDC Max. output current 40 mA 40 mA Isolation Line driver Photocoupler isolation Resistive 0.5A/1 點 (4A/COM) Current spec.
Inductive -- 12W (24 VDC) Lamp -- 2 W (24 VDC) Max. output OFFON 0.2 us delay time ONOFF Over-current protection N/A 120VAC Re sistive uctive(t=7ms) 30VDC Ind uctive(t=7ms) 240VAC Inductive(cosψ=0.4) VAC Inductive(cosψ= ~40ms) Contact 120 VAC Inductive 30VDC Inductive (t=40ms) 100~200VDC Inductive (t=7