3 Functions of Devices in DVP-PM „ Memory status between ON/OFF operation 3.2 Values, Constants [K] / [H], Floating Points [F] For fulllfilling different kinds of internal manipulation, DVP-PLC appies 5 foramts of number systems. Each number system has its specific purpose and function described as below. 1. Binary value (BIN) DVP-PM internally calculates, operates, and stores the value in Binary format. Bit, nibble, byte, word and double word in a binary system: DW Double word W1 W0 Word BY3 BY2 BY1 BY0 Byte NB0 NB1 NB2 NB3 NB4 NB5 NB6 NB7 Nibble Bit 2. Octal value (OCT) The external I/O points of DVP-PLC are numbered in octal format. e.g. External inputs: X0 ~ X7, X10 ~ X17, …, X377. (No.
of device) External outputs: Y0 ~ Y7, Y10 ~ Y17, …, Y377. (No.
of device) DVP-PM Application Manual 3-4 Power e OFF->ON MANU->AUTO AUTO->MANU Clear all non-latched Clear all latched area Memory typ Default (STOP->RUN) (RUN->STOP) areas (M1031=ON) (M1032=ON) Cleared Unchanged Cleared when M1033 = OFF Unchanged when M1033 = ON Cleared Unchanged 0 Non-latched Latched Unchanged Unchanged Cleared 0 Decimal K-32,768 ~ K32,767 (16-bit operation) K-2,147,483,648 ~ K2,147,483,647 (32-bit operation) K Constant Hexadecimal form H0000 ~ HFFFF (16-bit operation) H00000000 ~ HFFFFFFFF (32-bit operation) H Floating point 32 bits Displaying floating point value by 32-bit data complying with IEEE754 standard.
±1.1755X10-38 ~ ±3.4028X10+38 F Bit Bit is the basic unit of a binary number system. Range is 0 or 1 Nibble Consists of 4 consecutive bits, e.g. b3~b0. Range 0 ~ 9 in Decimal or 0~F in Hex Byte Consists of 2 consecutive nibbles, e.g. b7~b0. Range 00 ~ FF in Hex Word Consists of 2 consecutive bytes, e.g. b15~b0. Range 0000 ~ FFFF in Hex Double Word Consists of 2 consecutive words, e.g. b31~b1. Range 00000000 - FFFFFFFF in Hex