cisco IOS XE 17.16.x — IPv6 Address Assignment in Rommon Mode

3. The device sends a DHCPv6 solicit message to the multicast group address of ff02::1:2 for all DHCP agents. The following sample displays the fields in a DHCPv6 solicit packet during iPXE boot: DHCPv6 Message type: Solicit (1) Transaction ID: 0x36f5f1 Client Identifier Vendor Class Identity Association for Non-Temporary Address Option Request User Class Vendor-specific Information The DHCPv6 solicit message contains the following information: • DHCP Unique Identifier (DUID)—Identifies the client. iPXE supports DUID-EN. EN stands for Enterprise Number, and this DUID is based on the vendor-assigned unique identifier. • DHCP and DHCPv6 Options 4.

If the DHCPv6 server is configured, it responds with a DHCPv6 advertise packet that contains the 128 Bit IPv6 address, the boot file Uniform Resource Identifier (URI), the Domain Name System (DNS) server and domain search list, and the client and server IDs. The client ID contains the DUID of the client (In this illustration, the IPv6 Booting Device), and the Server ID contains the DUID of the DHCPv6 server. 5. The client then sends a DHCPv6 request packet to the multicast group address ff02::1:2, requesting for advertised parameters. 6. The server responds with a unicast DHCPv6 reply to the Link Local (FE80::) IPv6 address of the client.

The following sample displays the fields in a DHCPv6 reply packet: DHCPv6 Message type: Reply (7) Transaction ID: 0x790950 Identity Association for Non-Temporary Address Client Identifier Server Identifier DNS recursive name server Boot File URL Domain Search List 7. The device then sends an HTTP GET request to the web server. 8. If the requested image is available at the specified path, the web server responds with an OK for the HTTP GET request. 9. The TCP image transfer copies the image, and the device boots up. IPv6 Address Assignment in Rommon Mode The DHCP client uses the following order-of-precedence to decide which IPv6 address to use in rommon mode: 1.

DHCP Server-assigned address Provisioning IPv6 Address Assignment in Rommon Mode Programmability Configuration Guide, Cisco IOS XE 17.16.x 90