Chapter 2 Specifications and System Configuratio n 2_ *1: If the input signal exceeds the hardware input limit, the module only shows the maximum value. If the input signal is below the lower limit, it only shows the minimum value. *2: If the input signal exceeds the hardware input limit, it also exceeds the conversion limit and a conversion limit error appears. For example in the voltage input mode (4 mA to 20 mA), when the input signal is 0 mA, exceeding the hardware upper limit, it also exceeds the conversion upper limit. The module uses the upper limit value (-384) as the input signal and a conversion limit error appears. *3:
If an input signal exceeds the absolute range, it might damage the channel. Functional specifications for the digital-to-analog conversion 2-40 Analog-to-Digital Current Input Conversion Rated Input Range ±20 mA 0 mA–20 mA 4 mA–20 mA K-32000 ~ K+2000 K0 ~ K32000 K0 ~ K32000 Rated Conversion Range Hardware Input -20.24 mA ~ 20.24 mA -0.24 mA ~ 20.24 mA 3.81 mA ~ 20.19 mA Limit*1 K-32384 ~ K32384 K-384 ~ K32384 K-384 ~ K32384 Conversion Limit*2 Room Temperature: ±0.2% ; Full Temperature Range:
±0.5% Error Rate 16 bits Hardware Resolution 250Ω Input Impedance Absolute Input ±32 mA Range*3 Digital-to-Analog Voltage Output Conversion Rated Output Range ±10 V 0 ~ 10 V ±5 V 0 ~ 5 V 1 ~ 5 V K-32000 ~ K32000 K0 ~ K32000 K-32000 ~ K32000 K0 ~ K32000 K0 ~ K32000 Conversion Range -10.1 V ~ +10.1 V -0.1 V ~ 10.1 V -5.05 V ~ +5.05 V -0.05 V ~ +5.05 V 0.95 ~ 5.05 V Hardware Output Range Error Rate ±0.2% (Room Temperature) Error Range ±0.5% (Full temperature range) Linearity Error ±0.05% (Room Temperature) Linearity Error ±0.05% (Full Temperature Range) Hardware Resolution 12 bits Permissible load ≧1k Ω ≧500Ω impedance