Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering ❏ Algorithm Settings It is recommended that you select Any for all settings or select an item other than Any for each setting. If you select Any for some of the settings and select an item other than Any for the other settings, the device may not communicate depending on the other device that you want to authenticate. Configuring Group Policy A group policy is one or more rules applied to a user or user group. The scanner controls IP packets that match with configured policies. IP packets are authenticated in the order of a group policy 1 to 10 then a default policy. 1.
Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Basic . 2. Click a numbered tab you want to configure. 3. Enter a value for each item. 4. Click Next . A confirmation message is displayed. 5. Click OK . The scanner is updated. Group Policy Setting Items Access Control Configure a control method for traffic of IP packets. 223 Items Settings and Explanation IKE Encryption Select the encryption algorithm for IKE. The items vary depending on the version of IKE. Authentication Select the authentication algorithm for IKE. Key Exchange Select the key exchange algorithm for IKE. The items vary depending on the version of IKE.
ESP Encryption Select the encryption algorithm for ESP. This is available when ESP is selected for Security Protocol. Authentication Select the authentication algorithm for ESP. This is available when ESP is selected for Security Protocol. AH Authentication Select the encryption algorithm for AH. This is available when AH is selected for Security Protocol. Items Settings and Explanation Enable this Group Policy You can enable or disable a group policy.