Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering Local Address (Scanner) Select an IPv4 address or IPv6 address that matches your network environment. If an IP address is assigned automatically, you can select Use auto-obtained IPv4 address . Note: If an IPv6 address is assigned automatically, the connection may be unavailable. Configure a static IPv6 address. Remote Address(Host) Enter a device's IP address to control access. The IP address must be 43 characters or less. If you do not enter an IP address, all addresses are controlled. Note: If an IP address is assigned automatically (e.g.
assigned by DHCP), the connection may be unavailable. Configure a static IP address. Method of Choosing Port Select a method to specify ports. ❏ Service Name If you select Service Name for Method of Choosing Port , select an option. ❏ Transport Protocol If you select Port Number for Method of Choosing Port , you need to configure an encapsulation mode. ❏ Local Port If you select Port Number for Method of Choosing Port and if you select TCP or UDP for Transport Protocol , enter port numbers to control receiving packets, separating them with commas. You can enter 10 port numbers at the maximum. Example: 20,80,119,5220 If you do not enter a port number, all ports are controlled.
❏ Remote Port If you select Port Number for Method of Choosing Port and if you select TCP or UDP for Transport Protocol , enter port numbers to control sending packets, separating them with commas. You can enter 10 port numbers at the maximum. Example: 25,80,143,5220 If you do not enter a port number, all ports are controlled. 224 Items Settings and Explanation Permit Access Select this to permit configured IP packets to pass through. Refuse Access Select this to refuse confgi ured IP packets to pass through. IPsec Select this to permit configured IPsec packets to pass through. Items Settings and Explanation Any Protocol Select this to control all protocol types.
TCP Select this to control data for unicast. UDP Select this to control data for broadcast and multicast. ICMPv4 Select this to control ping command.