SC523 Chassis Manual Chapter 5: Chassis Setup and Maintenance PCI Slot Setup PCI Slot Cover Expansion Card Slots Figure 5-10. Remove the Expansion Card Slot Screw SC523 chassis include seven PCI slots for expansion cards. Figure 5-9. Installing the Motherboard Installing Expansion Cards: 1. Confirm that each add on card you are installing includes a standard L- bracket. 6. Secure the motherboard to the chassis using the rounded, Phillips head screws. Do not exceed eight pounds of torque when tightening down the motherboard. 2. Power down the system and remove the power cord as described in Section 5-2 and remove the cover as described in Section 5-3. 3.
Remove the screw holding the PCI slot cover in place for each low profile expansion card slot you want to use. Keep this screw for later use. 7. Secure the CPU(s), heatsinks, and other components to the motherboard as described in the motherboard documentation. 8. Connect the cables between the motherboard, backplane, chassis, front pan- el, and power supply, as needed. Also, the fans may be temporarily removed to allow access to the backplane ports. 4. Slide the PCI slot cover up and out of the slot. 5-10 5-11