SC733 Chassis Manual 4-2 Removing the Chassis Cover 2 Remove Screws 3 Figure 4-1: Removing the Chassis Cover Removing the Chassis Cover: 1. Power down the system and remove the power cord from the rear of the power supply. 2. On the rear of the chassis, remove the two screws holding the cover in place. 3. Slide the cover back, toward the rear of the chassis 4. Lift the cover off the chassis. Warning: Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating. 4-2