Chapter 4: Chassis Setup and Maintenance 4-3 Installing Hard Drives in the SC733i Model Chassis 3 2 Remove Screws Figure 4-2: Removing the Hard Drive Module The SC733i chassis must be powered-down before hard drives can be removed from the hard drive carriers. Replacing Hard Drives in the SC733i Chassis 1. Power down the system, remove the power cord from the rear of the power supply and open the chassis cover as described in section 4-2. 2. Remove the two screws securing the hard drive module to the chassis. 3. Gently slide the hard drive module out of the chassis. 4-3