Super Micro Computer, Inc. SC811 — Super Micro SC811 Chassis Manual PDF Download

SC811 Chassis Manual SAS/SATA or SCSI Hard Drive Drive Carrier Move the handle into the UP position to lock the drive into the chassis Figure 4-3. Removing the Drive from the Tray Installing a Hard Drive 1. Remove the hard drive tray from the chassis. 2. Mount a hard drive into the drive carrier using four screws as illustrated. 3. Replace the hard drive carrier in the chassis with the handle in the lowered position. 4. Secure the hard drive by pushing the handle into the upward position. Only enterprise level hard drives are recommended for use in Supermicro chassis Caution:

Except for short periods of time, such as swapping hard drives, do not oper­ ate the server with the hard drives empty. 4-4