Super Micro Computer, Inc. SC811 — Super Micro SC811 Chassis Manual PDF Download

Chapter 4: Chassis Setup and Maintenance 4-5 Installing the Motherboard Remove this screw Riser Card Bracket Remove this screw Figure 4-4. Removing the Riser Card Bracket Installing the Motherboard 1. Review the documentation that came with your motherboard. Become familiar with component placement, requirements, precautions, and cable connec­ tions. 2. Power down the system as described in Section 4-2 and remove the cover. 3. Remove the two screws holding the riser card bracket in place. 4. Remove the bracket from the chassis. 5. Locate the mylar sheet in the accessories package and place the sheet into the chassis. 6. Carefully place the motherboard in the chassis.

You must align the I/O shield with the motherboard ports. 4-5