Super Micro Computer, Inc. SC811 — Super Micro SC811 Chassis Manual PDF Download

Appendix C: Backplane Specifiications I 2 C and SGPIO Modes and Jumper Settings This backplane can utilize I 2 C or SGPIO. SGPIO is the default mode and can be used without making changes to your jumpers. The following information details which jumper must be configured to use SGPIO mode or restore your backplane to I 2 C mode. C-7 Jumper Settings: SGPIO and I2C (Default) Jumper SGPIO Setting I2C Setting (Default) JP33: CTRL ID _ Pins1-2: SGPIO mode enabled 2-3: I2C mode enabled JP40: I2CRST SDOUT _ On: SGPIO mode enabled Off: I2C mode enabled JP42: BPID SDIN _ Pins 1-2: SGPIO mode enabled 2-3: I2C mode enabled JP50: I2CRST Off: SGPIO mode enabled On: I2C mode enabled Jumper Settings:

Backplane ID Jumper I2C Backplane ID Settings JP34: BP ID _ Pins 1-2: ID#0 (Default) Pins 2-3: ID#1