SC811 Chassis Manual D-6 Front Connector Definitions 1. Main Power Connector The power connector is designated JP10. The main power connector provides power to the backplane. 2. - 3. SATA Cable Connectors The SATA cable connectors are designated J5 and J6. 4. Activity LED Connector The activity LED connector, designated JP26, is used to indicate the activity status of each SATA drive. The activity LED connector is lo cated on the front panel. In order for the activity LED header to work properly, connect using a 10-pin LED cable.
D-4 SATA Activity LED Header Pin Definitions Pin # Definition Pin # Definition 1 ACT IN#0 6 ACT IN#4 2 ACT IN#1 7 ACT IN#5 3 ACT IN#2 8 ACT IN#6 4 ACT IN#3 9 ACT IN#7 5 Ground 10 Empty