Supermicro SC815 — 5-3 Installing Hard Drives

SC815 Chassis Manual Chapter 5: Chassis Setup and Maintenance 5-3 Installing Hard Drives Drive Tray Dummy Drive 2 Figure 5-4. Chassis Drive Carrier The drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help promote proper airflow for the drive bays. Warning: Except for short periods of time (swapping hard drives), do not operate the chassis without the drive carriers. 1 1 1 Figure 5-3. Removing Hard Drive Carriers Removing Hard Drive Carriers from the Chassis 1. Press the release button on the drive carrier. This extends the drive carrier handle. 1 1 2. Use the handle to pull the drive carrier out of the chassis. Figure 5-5.

Removing a Dummy Drive from the Carrier Installing a Hard Drive to the Hard Drive Carrier 1. Remove the two screws securing the dummy drive to the carrier. 2. Remove the dummy drive from the carrier. 5-4 5-5