Supermicro SC846X — Supermicro SC846X Chassis User's Manual (4U) – Free PDF Download

SC846X Chassis Manual The user can install two 2.5" hot-swap hard drives in the drive drawer. Installing the Optional Hot-Swap 2.5" HDDs Drive Cage PCB Backplane Drives in Drive Carriers Figure 4-10. Drive Drawer with the Hot-Swap Drive Kit Installing the Hot-Swap Drive Kit 1. Remove the rear drive drawer. 2. Remove the small external cover plate from the rear of the drive drawer by removing the screws. Figure 4-11. Mounting the Backplane PCB from the Hot-Swap HDD Cage 3. Mount the small backplane PCB (from the kit) onto the mounting cage at the end opposite where the drives will be inserted using three screws. 4. Slide two 2.5" hard drives mounted in hard drive carriers into the tray. 5.

Secure the drive cage assembly to the drawer with screws through the bottom of the drawer. 6. Remove the external cover on the back of the 4-10