Motor speed Within the two dashed lines / V - CMP output s Pn320 For example: Pn320=100, when the speed Pn320 command is 2000r / min, the feedback speed is 1900r/min~2100r/min, then the signal outputs Speed command 2. Wiring of speed-consistent signals The speed-consistent signal is a universally configurable digital output signal. For details on wiring, see “Sequence Output Circuit”. 5.4 Torque Mode Refer to “Connection Example of Torque Control” for details on the wiring related to the torque mode. It is selected by control mode selection (Pn000=2).
The torque mode is divided into the internal torque command (Pn400=0) and the analog torque command (Pn400=1, factory default) by the selection of the torque command source. 100 SD700 Series Servo Technical Manual