Supplementary Notes About resolution The resolution used in the servo unit (the movement of 1 feedback pulse) can be obtained as following formula: The servo unit controls the servo motor in the unit of feedback pulse. The grating ruler pitch of linear encoder = 1 cycle distance of analog voltage feedback signal sent by linear encoder. The lead of screw rod is 16mm and the transmission ratio is 1:1 (direct connection). Semi closed-loop mode:
116 SD700 Series Servo Technical Manual Steps Contents Mechanical composition 1 Number of motor encoder lines 24bit encoder lines number 16777216 2 The number of pulses required for one turn of the screw rod The command unit is 0.0005mm (0.5 μm), and the number of pulses is 32000 3 Electronic gear ratio = 4 Parameter Pn204=16777216, Pn206=32000