VEICHI — SD700 User Manual 20230516

 Robust control selection is invalid (Pn175 = 0)  Tuning mode is set to 0 or 1 when tuning is performed by speed control The bandwidth setting procedure can be performed by any one of the SERVO Keyboard or PC debugging software. However, the keyboard can only operate when the tuning mode is set to “0- stability” or “1-high response”. For detailed operation procedure, see “7.13 Bandwidth Setting (Fn303)”. When positioning-specific adjustments “2-positioning” and “3-positioning without overshoot” are required, it shall be used with “PC debugging software”.

! Cautions Please set the bandwidth after the inertia recognition or the intelligent setting of the rotation inertia ratio (Pn100) correctly. 6.5.3 Additional Notes (1) Vibration suppression function Before setting the bandwidth, confirm whether the related vibration suppression function is automatically setting. The factory default is automatically setting. Please set the corresponding function switch to “No adjust automatically” before you don’t want to change its value through the bandwidth setting.

130 SD700 Series Servo Technical Manual Function code Parameter Range Default Unit Communication When address enabled Pn140 IF suppression control options 0x00~ 0x11 0x0010 - 0x0140 Immediately The IF(intermediate frequency) suppression control function effectively suppresses the continuous vibration of about 100 to 1000 Hz that occurs when the control gain is increased. 0x1#: Automatically set IF vibration suppression frequency through intelligent setting and bandwidth setting. 0x0#: Not set automatically through intelligent setting and bandwidth setting, only manual setting. 0x#1: IF suppression frequency setting valid. 0x#0: IF suppression frequency setting invalid.

Pn150 Notch filter 1 automatic adjustment selection 0x00~ 0x01 1 - 0x0150 Immediately 0- Automatic adjustment without auxiliary functions. 1- Automatic adjustment through auxiliary functions. Pn151 Notch filter 2 automatic adjustment selection 0x00~ 0x01 1 - 0x0151 Immediately