9.8.1 Jog Operation of External Terminals External terminal jog, terminal function definition is shown in the following table: The external terminal input and jog execution satisfy the following logic table: As shown in the above table, the relationship between Forward Jog and Reverse Jog is “exclusive OR”. That is, if only one terminal of Reverse Jog is valid, the Jog can be executed normally. 9.8.2 Communication Jog Communication Jog is realized by the high 16 bits of function code Pn89F. As shown in the above table, when the function code Pn89F is 0, the Jog function is turned off; when the function code is 1, Forward Jog is performed; when the given value is 2, Reverse Jog is performed.
Note: Regardless of the external terminal Jog or the communication Jog, you need to set the servo enable first. 225 SD700 Series Servo Technical Manual Terminal Description function definition 0x1E Forward jog 0x1F Reverse jog Forward jog 0x1E Reverse jog 0x1E Jog function description terminal status terminal status OFF OFF Not executed jog ON OFF Forward jog OFF ON Reverse jog ON ON Not executed jog Value Function 0 Jog invalid 1 Forward jog 2 Reverse jog