Main circuit input power Main circuit power disconnection time 280V *1 The bus voltage drop speed can be alleviated by bus voltage 200V*2 Undervoltage warning Torque limit 1: 560V at 400VAC 0% Torque 2: 400V at 400VAC 5.2 Position Mode For details on the wiring related to the position mode; see “Connection Control Example for Position Control”. The position control is selected by the control mode selection (Pn000 = 0, factory default). 5.2.1 Quick Guide Location Control Quick Guide Connect each part properly Drive panel display is normal No The upper system sends Is the actual position consistent with the given?
a fixed pulse Yes Confirm the gear ratio (Pn204, Pn206), frequency output (Pn070) Monitoring Un108, receiving No setting pulses follow given changes? No Yes Confirm the wiring (PULS/SIGN) Pulse input Filter Selection (Pn200) Run response to meet requirements? Yes For details of gain adjustment, see "Adjustment" Enable operation The end Is the direction of operation No consistent with the given? direction Yes Confirm Pn202 setting 82 SD700 Series Servo Technical Manual 1 limiting the output torque Starting torque limit Pn046