8 Inserta 1/4-20x 1trussheadscrewthroughbottom holeinthebracket,andthroughthefirstholein the righthandextension.Installa lockwasherandnuton thescrewHandtightenthenut NOTE:Whensawis upsidedown,righthandextension isontheleftsidewhenfacingfrontofsaw 9 Inserta 1/4-20x 1trussheadscrewthroughbottom hole in the other bracket and the fourth hole of the extension Install a Iockwasher and nut on the screw j Front of Saw 1/4-20 Hex Nut1/4 _ ў._---- Lockwasher Hand tighten the nut. 1st Hole Bracket Truss Hd. Screws G Installing Rip Fence Guide Bars and Switch Box 1. From the bag labeled "Guide Bars" remove the fol- lowing hardware: *3 Hex Head Screws, 5/16-18 x 1-t/2 5/16-18 x 3/4 Hex Hd. Screw 5/16 In.
External Lockwashers 5/16 In. Hex Jam Nut *3 Hex Head Screws, 5/16-I8 x 1 *6 Hex Jam Nuts, 5/I6-18 *4 Flat Washers, 21/64 x 5/8 x 1/16 *6 Lockwashers, 5/16 External Type *3 Spacers, 3/4 dia, x 1/2 long 5116-18 x 1-1/2 In Hex Hd. Screw 5/16-18 x 1 In. Hex Hd. Screw From the bag labeled "Miscellaneous" remove only the following hardware: *2 Hex Head Screws, 5/16-18 x 3/4 *2 Hex Jam Nuts, 5/16-18 From among the loose parts find the following: 1 Front Guide Bar *4 Lockwashers, 5/t6 External Type 21164 In. 1/2 In. Spacer Washer 1 Rear Guide Bar Items marked with asterisk (*) are shown actual size 2. Position guide bars on floor and install hardware as shown,.
Just start the nuts on the end of the screws, do not screw nuts on all the way, 8th Slot (For Mounting To Bracket) / Rear Guide Bar , ў 1 In Hex FI_ _ 3rd Slot Head'Screw wasner.._ __ l (For Mounting __'_ Hex Nut __--_ ToBracko, 1-112 ln.Hex 2rid Slot t_'_ ._ / Flat Washer Head Screw 1st SIo_t I Spacer Front Guide Bar 15